Cutek® Wood Preservative Oil 10L
Unless a clear finish that will naturally lighten/silver/grey off in a few months is desired, it is important to mix Cutek Colourtone: one 180ml pot / 5L of oil before use.
APVMA Approval No: 83026/107340
CUTEK® Wood Preservative is an oil based wood stabiliser used for the pre-treatment and remedial treatment of exterior wood in industrial and domestic situations.
CUTEK® Wood Preservative coated wood resists damage caused by fungal decay, mould, termites and moisture, improving dimensional stability and minimising warping, cupping and splitting.
Like CUTEK® Extreme CD50, CUTEK® Wood Preservative has been specially designed to withstand Australian conditions. Penetrating deeply into the timber, the protective properties within CUTEK® Wood Preservative repel moisture to improve the service life of timber.
CUTEK® Wood Preservative is easy to use and will not peel or flake, making maintenance fast and simple. Applied as a clear oil, CUTEK® Wood Preservative will allow timber to naturally silver over time. Mixing in one of 16 CUTEK® Colourtones will help to enhance and maintain the freshly oiled natural look of your timber or alter your timber colour to meet your design requirements.
CUTEK® Wood Preservative is the best choice for large scale commercial and government projects.
Typical Uses
All exterior wood applications except for those listed below:
- Acetylated wood
- Food preparation surfaces
- Wood which comes into direct contact with the ground
- Engineered bamboo products
CUTEK® Wood Preservative is not suitable for Interior Use.
VIEW PRODUCT INFORMATION/COLOUR SHEET HERE
Coverage Guide |
|
---|---|
New hardwoods dressed | 10–20m2/litre |
Old restored timber dressed | 7–9m2/litre |
New timber rough sawn | 7–9m2/litre |
Old restored timber rough sawn | 4–7m2/litre |
Shingles and shakes | 2–5m2/litre |